9-Band Graphic EQ Equalizer, Stereo Equalizer, High, Medium and Bass Adjustment, with Low-Cut Filter/LED Display Light/Feedback Detection Technology, for Music Entertainment

Welcome to "THYXGS"! Product Specifications: Product Name: 9-band Graphic EQ Equalizer Input Type: 6.3 mm stereo jack (balanced) or RCA jack (unbalanced) Impedance: Approx. 20 kOhm (balanced) Approx. 10 kOhm (unbalanced) Common Mode Rejection Rate: 40 dB at 1 kHz Maximum Input Level: +15 dBu Output Type: 6.3 mm jack (unbalanced) or RCA jack (unbalanced) Impedance: Approx. 120 ohms Maximum Output Level: +15 dBu Frequency Response: -3 dB from 10 Hz to 200 kHz Dynamic Range: 110 dB from 10 Hz to 22 kHz Harmonic Distortion: 0.003% at 0 dBu Crosstalk: <80 dBu at 1 kHz Signal to Noise Ratio: <95 dB from 10 Hz to 22 kHz at 0 dBu , A-weighted Type: Analog Stereo 9-band Control Range: +/-6 dB or +/-12 dB, selectable Bandwidth: 1 octave Low-cut filter: 75 Hz (12 dB/octave) Input level control: -12 dB to +12 dB Power connection: Power adapter Packing list: Host*1

• 【9-band graphic equalizer】: With its nine frequency bands, you can easily fine-tune the sound and eliminate feedback instantly. Each fader can be used to increase or decrease the frequency range it controls by up to 12DB, an ultra-compact graphic equalizer for studio and stage.
• 【High, medium and bass adjustment】: The green light represents normal signal, the yellow light represents the signal close to saturation, and the red light represents sound overload. Raising and lowering specific frequency bands can improve the frequency response of any room acoustics.
• 【Low-cut filter】: The graphic equalizer also has a low-cut filter for eliminating unwanted low frequencies such as floor rumble, room resonance, electronic hum, etc.
• 【Feedback detection technology】: When the frequency band approaches the danger zone, the LED on each fader will light up. All you need to do is lower the glowing slider until the LED flashes - voila, feedback problem solved!
• 【LED display light】: Precise 6-segment LED input/output meter and level control for precise level indication.